{"id":495782,"date":"2025-03-17T20:05:21","date_gmt":"2025-03-17T12:05:21","guid":{"rendered":"https:\/\/whitemarblegranite.com\/?post_type=products&p=495782"},"modified":"2026-11-01T23:36:03","modified_gmt":"2026-11-01T15:36:03","slug":"splitface-limestone-tiles","status":"publish","type":"products","link":"https:\/\/whitemarblegranite.com\/lt\/product\/splitface-limestone-tiles\/","title":{"rendered":"Splitface Limestone Tiles"},"content":{"rendered":"
\n
\n

Greitas apibendrinimas<\/p>\n

Splitface Limestone Tiles<\/strong> are beige limestone wall cladding pieces with irregular cleft faces that create pronounced relief and shadow rather than a smooth polished surface. Esta Stone supplies these cut-to-size tiles for villa facades, entrance elevations, courtyard walls and interior feature panels, with nominal 12\u2033\u00d712\u2033, 12\u2033\u00d724\u2033 and 24\u2033\u00d724\u2033 formats referenced in the original range. Historical thickness references are 10mm, 18mm, 20mm and 30mm; the finished face-to-back dimension must be established from a physical sample because split relief varies. Exterior suitability depends on the stone’s tested properties, climate, substrate, drainage and an appropriate fixing system.<\/p>\n<\/section>\n

\n
\"Splitface<\/div>\n
\n

Splitface Limestone Tiles for Villa Facades and Interior Feature Walls<\/span><\/h2>\n

Splitface Limestone Tiles<\/strong> give beige architectural walls a rough, dimensional finish. Each exposed face contains raised mineral areas, shallow recesses and irregular edges of texture that catch light differently throughout the day.<\/p>\n

The tiles can be arranged across villa elevations, entrance columns, courtyard boundary walls and interior feature panels. Unlike smooth limestone cladding, the visible face is deliberately uneven, producing a more pronounced shadow pattern without adding separate decorative moldings.<\/p>\n

The selected format, relief depth and installation system should be considered together. For exterior work, the design must address weather exposure, moisture movement and safe stone fixing rather than relying on the textured appearance alone.<\/p>\n<\/div>\n<\/section>\n

Beige Limestone Split Wall Tiles: Color, Surface Relief and Shadow<\/h2>\n

Beige limestone split wall tiles<\/strong> have a different visual character from polished or honed limestone. The surface is split or mechanically worked to expose irregular mineral layers, producing small ledges and changes in face depth. These features catch direct and oblique light, making the wall appear more dimensional.<\/p>\n

The beige background may range from light cream and ivory to warm sand tones. Small changes in mineral grain, layering and surface relief are normal characteristics of this finish. Tile sorting matters when a large wall requires a consistent overall appearance.<\/p>\n

On a sunlit exterior elevation, the deeper parts of the split face create darker shadow lines. A sheltered interior wall has a quieter effect unless it is lit from the side. Recessed linear lighting or carefully positioned wall washers can accentuate the relief, although excessive grazing light may also make uneven joints more noticeable.<\/p>\n

Because the material is primarily a wall cladding product, it should be judged as a complete group of tiles rather than a single small piece. An approved sample panel helps establish the acceptable range of beige tones, protruding areas and surface texture.<\/p>\n

\n
\"Splitface<\/div>\n
\"Beige<\/div>\n<\/div>\n

Splitface Limestone Tiles Specifications, Sizes and Thickness<\/h2>\n

The original catalogue includes nominal 12\u2033\u00d712\u2033, 12\u2033\u00d724\u2033 and 24\u2033\u00d724\u2033 wall tile formats, along with 10mm, 18mm, 20mm and 30mm thickness references. The available combinations depend on the limestone selection, cutting method and required split-face depth.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Produkto pavadinimas<\/strong><\/td>\nSplitface Limestone Tiles<\/td>\n<\/tr>\n
Med\u017eiaga<\/strong><\/td>\nSplitface Limestone Tiles, Beige Splitface Limestone Wall Tiles<\/td>\n<\/tr>\n
Spalva<\/strong><\/td>\nBeige \/ Warm Cream \/ Sand Beige<\/td>\n<\/tr>\n
Nominal Tile Formats<\/strong><\/td>\n12\u2033\u00d712\u2033 \/ 12\u2033\u00d724\u2033 \/ 24\u2033\u00d724\u2033<\/td>\n<\/tr>\n
Approximate Metric Formats<\/strong><\/td>\n305\u00d7305mm \/ 305\u00d7610mm \/ 610\u00d7610mm<\/td>\n<\/tr>\n
Thickness References<\/strong><\/td>\n10mm \/ 18mm \/ 20mm \/ 30mm; suitable combinations to be confirmed<\/td>\n<\/tr>\n
Visible Face<\/strong><\/td>\nSplitface \/ Rock-Faced \/ Cleft Texture<\/td>\n<\/tr>\n
Back Surface<\/strong><\/td>\nFlat or calibrated where specified for the approved installation system<\/td>\n<\/tr>\n
Edge Configuration<\/strong><\/td>\nSawn edges \/ selected split returns \/ custom corners by drawing<\/td>\n<\/tr>\n
Additional Face Options<\/strong><\/td>\nHoned or other finished faces available only as separately confirmed product variants<\/td>\n<\/tr>\n
Primary Applications<\/strong><\/td>\nVilla Facades \/ Interior Feature Walls \/ Entrance Walls \/ Courtyard Walls \/ Exterior Cladding<\/td>\n<\/tr>\n
Historical MOQ Reference<\/strong><\/td>\n300 SQM; current order conditions to be confirmed<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

The original tile dimensions are nominal references. Actual cut size, face projection, thickness deviation and installation tolerances must be approved for the selected material. The approximate metric equivalents should not be substituted for inch-based manufacturing dimensions without confirming the purchase specification.<\/p>\n

What Thickness Means for Splitface Limestone Wall Cladding<\/h2>\n

Unlike a smooth calibrated tile, splitface limestone can have a changing face-to-back dimension. The raised portions of the exposed surface may project beyond the lower areas, so the nominal tile thickness and maximum overall thickness are not necessarily the same measurement.<\/p>\n

When specifying 10mm, 18mm, 20mm or 30mm limestone, the buyer should clarify whether the measurement describes the base stone, a nominal overall section or another agreed reference point. This becomes particularly important when the wall contains window frames, door surrounds, metal trims or other fixed architectural elements.<\/p>\n

The back surface is equally important. A suitably prepared and sufficiently flat backing face supports the selected installation method. A deeply uneven rear surface may require additional setting material or may not be suitable for a particular thin-bed adhesive system.<\/p>\n

For exterior facades, panel thickness must be established from the stone properties, fixing method, tile dimensions, exposure and relevant engineering requirements. No single thickness can be recommended safely for every facade height or building condition.<\/p>\n

Beige Splitface Limestone for Villa Exterior Facades<\/h2>\n

Beige splitface limestone is suitable for consideration on villa elevations where a warm stone finish is required around entrance doors, projecting architectural volumes, recessed balconies or selected facade sections. Its pale cream-beige tone can coordinate with off-white render, timber-effect metalwork and dark aluminium window frames.<\/p>\n

A facade does not need to be entirely covered in textured limestone. Concentrating the material around the ground-floor entrance, porch columns or a projecting wall can create a stronger architectural composition while allowing the remaining building surfaces to stay relatively simple.<\/p>\n

Exterior installation exposes the stone to rain, wind, airborne particles and temperature changes. The actual limestone selection must be assessed for the local climate. In regions with freezing conditions, suitable frost-resistance evidence is particularly important.<\/p>\n

The wall design must also control water movement behind and around the cladding. Copings, flashings, drainage paths and joints are part of the complete facade system; a protective surface treatment cannot compensate for poor water management.<\/p>\n

For multi-elevation villa projects, agree on an approved tile sample and overall color range before production. Separate batches can produce visible differences across adjoining walls, particularly under direct sunlight.<\/p>\n

\"Beige<\/p>\n

Splitface Limestone Feature Walls for Villas, Hotels and Entrance Lobbies<\/h2>\n

Interior feature walls allow the relief of splitface limestone to become the principal decorative element without the same degree of weather exposure as exterior cladding. Suitable locations include villa living rooms, reception backdrops, hotel entrance lobbies and selected circulation areas.<\/p>\n

Long rectangular tiles can be arranged in horizontal courses, creating a layered appearance. Larger square or rectangular pieces produce broader relief across the wall. The selected format changes both the visual rhythm and the number of visible joints.<\/p>\n

Directional lighting is especially relevant. Light striking the surface from one side emphasizes the clefts and raised mineral sections; more diffuse lighting reduces the shadow contrast. For a reception feature, a sample panel should be viewed under the intended lighting before the complete wall is approved.<\/p>\n

A rough splitface surface may collect more dust than honed limestone. For that reason, it is generally better suited to accessible decorative walls than areas directly behind basins, splash-prone counters or other locations requiring frequent wiping.<\/p>\n

When used close to fireplaces or other heat-producing installations, the whole wall assembly, any treatment chemicals and required appliance clearances should be assessed as part of the project design.<\/p>\n

\"Split<\/p>\n

Tile Layout, Wall Corners and Edge Returns for Textured Limestone<\/h2>\n

The finished appearance of splitface wall cladding depends on how the tiles meet at the joints and corners. An irregular relief surface will not create the same straight visual line as a polished limestone wall, even when the supporting tile edges are precisely cut.<\/p>\n

For horizontal courses, staggered joints are one option, but the final pattern should follow the architectural drawing and the dimensions of the supplied tiles. Repeated short pieces near openings should be avoided where they produce awkward narrow cuts.<\/p>\n

External corners can be formed using suitable return pieces, carefully arranged cut edges or coordinated architectural trims. The chosen method should be shown on an approved detail drawing, especially when the project needs the rock-faced texture to continue around a column or wall return.<\/p>\n

Window reveals, door jambs and adjoining finishes require allowance for the maximum face projection. If the relief is not considered early, raised limestone areas may interfere with trims, frames or lighting details after installation.<\/p>\n

Adhesive Fixing, Mechanical Support and Exterior Wall Safety<\/h2>\n

The installation method must be suitable for the stone thickness, tile format, backing condition and wall substrate. Smaller interior wall pieces may be compatible with an approved bonded system, while larger or heavier exterior panels can require additional mechanical support.<\/p>\n

A facade fixing specification should account for panel self-weight, wind action, building movement, environmental exposure and the capacity of the supporting structure. The use of an adhesive or a mechanical system must be determined by the project designer and applicable construction requirements.<\/p>\n

The prepared backing face matters because adhesive performance depends on the contact surface and installation system. Loose material, incompatible surface treatments or an unsuitable substrate may compromise adhesion even if the exposed limestone looks sound.<\/p>\n

Movement joints should be coordinated with the building structure and cladding layout. Continuous stonework must not be allowed to bridge a required structural movement joint without a suitable engineered detail.<\/p>\n

For high exterior walls or areas above pedestrian circulation, the fixing and inspection requirements are especially important. Do not assume that a tile proven on a low interior wall can be installed in the same way on an exposed facade.<\/p>\n

Weather Resistance, Water Absorption and Efflorescence Risks<\/h2>\n

Limestone properties vary between deposits and selections. A beige appearance and rough surface finish cannot establish water absorption, freeze-thaw resistance or long-term durability. Exterior specification should be based on the selected material’s test information and the local exposure conditions.<\/p>\n

Moisture entering behind wall cladding may carry soluble salts from mortar, grout or adjacent construction materials. As the moisture migrates to the surface and evaporates, visible white deposits or damp marks can appear. This is why facade drainage, joint design and substrate moisture control matter as much as the choice of stone.<\/p>\n

In colder climates, freeze-thaw cycling can damage unsuitable porous stone. Where the project requires frost resistance, the selected limestone should be evaluated using relevant testing rather than approved solely on the basis of general limestone use in architecture.<\/p>\n

A compatible water-repellent treatment may help limit certain forms of moisture entry and staining, but it must be assessed for vapor permeability, appearance, adhesion compatibility and maintenance. The treatment is not a substitute for a properly detailed exterior wall.<\/p>\n

For coastal or polluted environments, salt exposure and atmospheric deposits should also be considered. The irregular split surface can hold contamination in recessed areas, making an accessible cleaning strategy important.<\/p>\n

Technical Performance Checks for Splitface Limestone Facade Tiles<\/h2>\n

Engineering assessment should be based on the limestone selection intended for the project. No current-batch laboratory results have been provided for this product, so the items below identify the relevant properties and test methods without assigning unverified numerical values.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
Technical Property<\/strong><\/td>\nReference Standard<\/strong><\/td>\nProject Status<\/strong><\/td>\n<\/tr>\n
Apparent Density \/ Open Porosity<\/td>\nEN 1936<\/td>\nCurrent material test result required where specified.<\/td>\n<\/tr>\n
Vandens absorbcija<\/td>\nEN 13755<\/td>\nConfirm for exterior exposure and moisture assessment.<\/td>\n<\/tr>\n
Lankstumo stiprumas<\/td>\nEN 12372<\/td>\nRequired for relevant panel and support calculations.<\/td>\n<\/tr>\n
Suspaudimo stiprumas<\/td>\nEN 1926<\/td>\nObtain project-specific evidence if requested.<\/td>\n<\/tr>\n
Atsparumas \u0161al\u010diui<\/td>\nEN 12371<\/td>\nAssess for freeze-thaw climates.<\/td>\n<\/tr>\n
Cladding Slab Product Requirements<\/td>\nEN 1469<\/td>\nReview applicable requirements, dimensions and declared deviations.<\/td>\n<\/tr>\n
Dimensional Measurement<\/td>\nEN 13373<\/td>\nAgree on nominal thickness and allowable split-face variation.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

No numerical laboratory values or current-batch certificates are claimed for these Splitface Limestone Tiles. Applicable standards, tests and fixing calculations should be selected according to the actual product dimensions, intended facade system and destination-country requirements.<\/p>\n

Beige Tone Sorting and Approval for Large Wall Cladding Orders<\/h2>\n

A large splitface limestone installation should be approved as a complete surface, not merely as a carton of individually acceptable pieces. Differences in beige tone and face relief become more noticeable when hundreds of tiles are placed together.<\/p>\n

An approved sample panel can establish the intended color range, size distribution, surface projection, joint width and pattern arrangement. For projects with multiple villa elevations, grouping tiles by similar tone can help prevent one area from appearing visibly warmer or cooler than the adjacent wall.<\/p>\n

It is also useful to distinguish acceptable split texture from defects affecting performance. Loose surface fragments, weak corners, cracking through the tile and unsuitable backing conditions require separate inspection from ordinary rough-face variation.<\/p>\n

Where a facade contains long uninterrupted runs, sample approval should account for the appearance under both daylight and shadow. A tile batch that looks uniform indoors may show stronger differences in relief when installed on a sunlit wall.<\/p>\n

Cleaning Splitface Limestone Without Damaging the Rough Surface<\/h2>\n

The irregular relief of splitface limestone needs a different cleaning method from a smooth polished tile. Dust, building residue and atmospheric particles can remain in recessed areas, particularly on sheltered facades and interior feature walls.<\/p>\n

Routine maintenance should use soft or suitable non-metallic brushes and cleaners formulated for limestone. A low-pressure water rinse may be appropriate for approved exterior installations, provided it does not drive moisture into vulnerable joints or the wall assembly.<\/p>\n

Avoid acidic brick cleaners, vinegar, aggressive descalers and uncontrolled pressure washing. Limestone is generally sensitive to acids, while strong water pressure may damage joints, dislodge weakened surface particles or force moisture into the substrate.<\/p>\n

Any protective treatment should first be tried on a representative sample to check whether it darkens the beige surface or changes the appearance of the raised areas. Cleaning and maintenance requirements are part of the long-term facade specification, not simply a post-installation task.<\/p>\n

Inspection and Export Packing for Splitface Limestone Wall Tiles<\/h2>\n

Inspection should begin with the agreed tile dimensions, color range and split-face reference. The face texture should be sufficiently consistent for the approved project appearance, while the backing and edges should meet the requirements of the selected installation method.<\/p>\n

For exterior wall orders, important checks include loose fragments, broken corners, dimensional variation, excessive face projection and the condition of any special corner pieces. These defects can affect both installation efficiency and the finished wall.<\/p>\n

Project packing should separate different tile formats, thicknesses, special returns and color groups where needed. Protective dividers and reinforced crates help limit edge damage in transit, while labels tied to the project schedule reduce sorting at the installation site.<\/p>\n

For a larger facade project, the packing list should identify the total quantities by tile format and any separately fabricated parts. Approval photos can accompany the shipment records so the receiving contractor can compare the delivered batches with the agreed sample range.<\/p>\n

Frequently Asked Questions About Splitface Limestone Tiles<\/h2>\n

What are Splitface Limestone Tiles?<\/h3>\n

Splitface Limestone Tiles are limestone wall cladding pieces with rough, irregular cleft faces that create a raised, textured appearance. They are used for villa facades, entrance walls, courtyard cladding and interior feature walls.<\/p>\n

What sizes and thicknesses are available for beige splitface limestone?<\/h3>\n

The original catalogue references nominal 12\u2033\u00d712\u2033, 12\u2033\u00d724\u2033 and 24\u2033\u00d724\u2033 tiles with 10mm, 18mm, 20mm and 30mm thickness options. Actual thickness, surface projection and available size combinations must be confirmed for the selected tiles.<\/p>\n

Can Splitface Limestone Tiles be installed on exterior villa facades?<\/h3>\n

They can be considered for exterior villa cladding when the selected limestone meets the required weathering and mechanical criteria and the fixing, drainage, substrate and movement joints are properly designed. Exterior suitability cannot be established from the splitface texture alone.<\/p>\n

Is splitface limestone suitable for floors or shower walls?<\/h3>\n

The featured splitface finish is intended primarily for vertical cladding. Its pronounced relief makes it unsuitable as a direct substitute for smooth floor tiles and difficult to clean in splash-prone shower areas. Separate limestone finishes should be considered for those applications.<\/p>\n

Does splitface limestone require sealing?<\/h3>\n

The need for a protective treatment depends on the selected limestone’s absorption, climate and installation conditions. A compatible treatment may help manage staining and moisture, but it cannot replace drainage, suitable joints or an approved wall fixing system.<\/p>\n

What information is needed for a bulk Splitface Limestone Tiles quotation?<\/h3>\n

Provide the required square metres, nominal tile sizes, thickness, desired split-face depth, installation location, wall elevations, corner details and shipping destination. Exterior projects should also identify the proposed fixing system and applicable performance requirements.<\/p>\n

Splitface Limestone Tiles Compared with Four Beige and White Limestone Products<\/h2>\n

Splitface Limestone Tiles are chiefly a textured wall cladding product. The four alternatives below offer different colors, mineral patterns and surface selection possibilities for architectural projects where a smoother or more directional limestone appearance is preferred.<\/p>\n

\n\n\n\n\n\n\n\n\n
Comparison<\/strong><\/td>\nSplitface Limestone Tiles<\/strong><\/td>\nFrench Brown Sand Limestone<\/strong><\/td>\nPlano Limestone Tiles<\/strong><\/td>\nBeyningo balto kalkakmenio<\/strong><\/td>\nMoca kremo kalkakmenis<\/strong><\/td>\n<\/tr>\n
I\u0161vaizda<\/strong><\/td>\nBeige with pronounced rock-faced relief and deep texture.<\/td>\nWarm brown and sandy limestone tones.<\/td>\nLight cream-ivory field with subtle grain and fossil details.<\/td>\nWhite to off-white background with restrained mineral texture.<\/td>\nCream-beige limestone with directional mineral bands.<\/td>\n<\/tr>\n
Surface Character<\/strong><\/td>\nIrregular splitface texture creates light and shadow.<\/td>\nWarm-toned mineral texture, dependent on selected finish.<\/td>\nRelatively fine-grained surface with understated variation.<\/td>\nFine, pale texture for visually lighter walls.<\/td>\nDirectional linear grain suited to organized panel layouts.<\/td>\n<\/tr>\n
Product Form<\/strong><\/td>\nTextured facade and interior wall cladding tiles.<\/td>\nLimestone pieces and project-based architectural cladding.<\/td>\nLimestone tiles and cut-to-size architectural pieces.<\/td>\nLimestone slabs, tiles and wall cladding.<\/td>\nLimestone slabs and tiles for wall and floor projects.<\/td>\n<\/tr>\n
Primary Design Use<\/strong><\/td>\nVilla facades, courtyard walls and textured feature walls.<\/td>\nWarm brown architectural accents and wall surfaces.<\/td>\nNeutral stone floors and interior or exterior wall designs.<\/td>\nBright minimalist walls and architectural interiors.<\/td>\nCream limestone facades, wall panels and flooring.<\/td>\n<\/tr>\n
Buying Priority<\/strong><\/td>\nFace relief, total thickness, backing condition, fixing and weathering tests.<\/td>\nBrown shade, finish and current tile dimensions.<\/td>\nCream tone, fossil distribution and chosen tile finish.<\/td>\nWhite tone consistency, thickness and surface selection.<\/td>\nVein direction, cream tone and panel orientation.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

Recommended Limestone Tiles and Architectural Cladding Materials<\/h2>\n
\n
\n
\"French<\/div>\n

French Brown Sand Limestone<\/h3>\n

Warm brown limestone for architectural accents and coordinated interior wall surfaces.<\/p>\n

View More<\/a><\/p>\n<\/div>\n

\n
\"Plano<\/div>\n

Plano Limestone Tiles<\/h3>\n

Cream-ivory limestone tiles with fine mineral texture for walls and flooring.<\/p>\n

View More<\/a><\/p>\n<\/div>\n

\n
\"Beining<\/div>\n

Beyningo balto kalkakmenio<\/h3>\n

Pale white limestone for minimalist interiors and light-toned wall cladding.<\/p>\n

View More<\/a><\/p>\n<\/div>\n

\n
\"Moca<\/div>\n

Moca kremo kalkakmenis<\/h3>\n

Cream Portuguese limestone with linear grain for facades and coordinated architectural surfaces.<\/p>\n

View More<\/a><\/p>\n<\/div>\n<\/div>\n<\/section>\n

\n
\"The
The Best 10 Splitface Limestone Tiles for Exterior Wall Cladding Supplier-Esta Stone<\/figcaption><\/figure>\n<\/div>\n
\n

Splitface Limestone Tiles for Exterior Wall Cladding: Custom Sizes, Facade Layouts and Bulk Orders<\/h2>\n

For a villa facade or commercial wall project, confirm the required tile sizes, intended split-face depth, overall thickness, corner details and installation environment. The exposed limestone surface and the backing must suit both the architectural appearance and the planned fixing method.<\/p>\n

Send wall elevations or a quantity schedule showing the main tile formats, window and door returns, special corners and proposed installation system. For exterior work, the technical specification should also identify climate exposure and any required mechanical, absorption or frost-resistance testing.<\/p>\n

Indicative material price:<\/strong> USD 48\u201355\/SQM. Project quantity reference:<\/strong> 3,000 SQM. Final pricing depends on the limestone selection, tile sizes, split-face processing, thickness, special pieces, packing and delivery terms. This project quantity is not a minimum order requirement.<\/p>\n

Request Splitface Limestone Tiles Quote<\/a>
\nExplore Limestone Collection<\/a><\/div>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"
\n

Splitface Limestone Tiles<\/strong> are beige limestone wall cladding tiles with irregular, rock-faced surfaces that create visible depth and shadow across architectural walls. Esta Stone supplies these textured limestone tiles for villa facades, courtyard walls, hotel entrances and interior feature walls. The original product range includes 12\u2033\u00d712\u2033, 12\u2033\u00d724\u2033 and 24\u2033\u00d724\u2033<\/strong> nominal formats, with 10mm, 18mm, 20mm and 30mm thickness references. Custom sizes and exterior installation requirements should be confirmed against the selected tile sample, actual face relief and project fixing design.<\/span><\/p>\n\n\n\n\n\n\n\n\n
Med\u017eiaga<\/strong><\/span><\/td>\nSplitface Limestone Tiles, Beige Splitface Limestone Wall Tiles<\/span><\/td>\n<\/tr>\n
Spalva<\/strong><\/span><\/td>\nBeige \/ Cream \/ Warm Sand Tones<\/span><\/td>\n<\/tr>\n
Tile Size References<\/strong><\/span><\/td>\n12\u2033\u00d712\u2033 \/ 12\u2033\u00d724\u2033 \/ 24\u2033\u00d724\u2033 \/ Custom<\/span><\/td>\n<\/tr>\n
Thickness References<\/strong><\/span><\/td>\n10 \/ 18 \/ 20 \/ 30mm<\/span><\/td>\n<\/tr>\n
Pavir\u0161iaus apdaila<\/strong><\/span><\/td>\nSplitface \/ Rock-Faced<\/span><\/td>\n<\/tr>\n
Parai\u0161kos<\/strong><\/span><\/td>\nVilla Facades \/ Wall Cladding \/ Feature Walls \/ Entrance Walls<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>","protected":false},"featured_media":495783,"template":"","adweb_product_categories":[129],"adweb_product_tags":[31593,31595,31594,31592,31590,31591],"class_list":["post-495782","products","type-products","status-publish","has-post-thumbnail","hentry","adweb_product_cat-limestone","adweb_product_tag-beige-limestone-tiles","adweb_product_tag-limestone-split-wall-tiles","adweb_product_tag-natural-split-limestone-tiles","adweb_product_tag-natural-splitface-limestone-tiles","adweb_product_tag-splitface-limestone","adweb_product_tag-splitface-limestone-tiles"],"gallery":[495786,495785,495784,495783],"order":"0","acf":[],"_links":{"self":[{"href":"https:\/\/whitemarblegranite.com\/lt\/wp-json\/wp\/v2\/adweb_products\/495782","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/whitemarblegranite.com\/lt\/wp-json\/wp\/v2\/adweb_products"}],"about":[{"href":"https:\/\/whitemarblegranite.com\/lt\/wp-json\/wp\/v2\/types\/products"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/whitemarblegranite.com\/lt\/wp-json\/wp\/v2\/media\/495783"}],"wp:attachment":[{"href":"https:\/\/whitemarblegranite.com\/lt\/wp-json\/wp\/v2\/media?parent=495782"}],"wp:term":[{"taxonomy":"adweb_product_cat","embeddable":true,"href":"https:\/\/whitemarblegranite.com\/lt\/wp-json\/wp\/v2\/adweb_product_categories?post=495782"},{"taxonomy":"adweb_product_tag","embeddable":true,"href":"https:\/\/whitemarblegranite.com\/lt\/wp-json\/wp\/v2\/adweb_product_tags?post=495782"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}