Marmora, granīta, luksusa kvarcīta, inženierijas kvarca fabrikas Ķīnā pieredze un kvalitāte
Profesionāla balta marmora flīzes un mākslīgā marmora ražotājs

Bianco Sivec Marble

Kategorijas

Sazinieties ar mums

Bianco Sivec Marble

Bianco Sivec Marble Slabs Piedāvā smalkgraudainu baltu kristālisku virsmu ar maigām pelēkām zīmēm un maigām toņu variācijām. Esta Stone piegādā pulētu un slīpētu Sivec balto marmoru villu grīdām, viesnīcu sienu apšuvumam, vannasistabu interjeram un pēc pasūtījuma sagrieztām arhitektūras panelēm. Salīdzinoši vienveidīgais baltais izskats ļauj lielākiem grīdas un sienu laukumiem saglabāt vizuālu nepārtrauktību, savukārt kristāliskā tekstūra kļūst labāk redzama tiešā apgaismojumā. Lielo plāksņu izmēri ietver 2400 mm+ × 1200 mm+ un 2600 mm+ × 1600 mm+, ar vairākiem biezuma un flīžu formātiem, kas pieejami iekšdarbu izgatavošanai.

Materiāls Bianco Sivec marmora plāksnes, Sivec baltais marmors
Izcelsme Prilepa, Ziemeļmaķedonija
Krāsa Smalki balti / Maigas pelēkas zīmes
Biezums 15 / 18 / 20 / 25 / 30 mm referenci
Apdare Pulēts / slīpēts
Produkta formas Plāksnes / Grīdas flīzes / Sienu paneļi
Pieteikumi Villu grīdas / Viesnīcu sienas / Vannasistabas

Apraksts

Ātrs kopsavilkums

Bianco Sivec Marble is a fine-grained white dolomitic marble associated with the Prilep region of North Macedonia. Its crystalline background ranges from clear white to slightly warmer white, with occasional soft grey markings and small mineral clusters. Esta Stone supplies Bianco Sivec Marble Slabs for polished interior flooring, hotel wall panels, villa bathrooms and cut-to-size architectural stonework. The relatively quiet pattern allows adjoining slabs and tiles to form broad white surfaces without prominent decorative veining. Polished and honed finishes create different levels of reflection while retaining the material’s fine crystalline character.

Bianco Sivec Marble Slabs for Villa Flooring and Hotel Wall Cladding

Bianco Sivec Marble polished white slab with fine crystalline grain and subtle grey markings

Bianco Sivec Marble is recognized by its fine white crystalline grain and relatively restrained mineral pattern. Unlike strongly veined white marble, the surface does not rely on large diagonal lines or contrasting colored bands. Its appearance develops through subtle variations between white crystal areas and occasional pale grey markings.

This material character is especially suited to broad interior surfaces. In a villa entrance hall, polished Bianco Sivec Marble tiles can create a continuous pale floor beneath darker furniture and timber doors. The small-scale crystal pattern remains visible without dominating the architectural layout.

On hotel walls, large Sivec Marble Slabs form a bright background for reception desks, metal detailing and architectural lighting. The white surface reflects ambient light, while the fine grain keeps the appearance more uniform than marble with pronounced grey or violet veins.

Individual slabs still vary in background tone and mineral density. Some selections have a nearly uniform white appearance; others contain scattered grey markings. This range is part of the commercial Bianco Sivec selection and becomes relevant when several large panels are installed alongside one another.

Sivec White Marble: Fine Crystalline Texture and White Tone Selection

Bianco Sivec White Marble slab with white crystalline background and delicate grey mineral details

Sivec baltais marmors is a predominantly dolomitic marble with a compact crystalline appearance. The small grain size produces a fine surface texture rather than the broad mineral patches seen in many decorative white stones.

The most visible variation between Bianco Sivec slabs is often the white background itself. A cooler white selection can appear cleaner beside charcoal or black materials, while a slightly warmer selection may coordinate better with beige plaster, oak joinery and bronze-colored fittings.

Fine grey marks and small mineral concentrations may occur across the slab. Under direct daylight, these details can be easier to see than under warm artificial lighting. The same panel may therefore look different in a showroom and in its intended interior.

For large white marble floors, this variation should be understood as part of the finished visual composition. A layout with consistently pale pieces reads differently from one that deliberately includes subtle grey movement. Neither appearance requires bold bookmatching to achieve a balanced result.

Bianco Sivec Marble Slab Gallery: Large-Format and Polished Surfaces

The following views show Bianco Sivec Marble in large slab form. The first emphasizes the fine white stone background, while the second shows the reflective appearance of polished Sivec Marble Slabs. Both help illustrate how subtle mineral details appear across a larger surface.

Bianco Sivec Marble Slab with fine white mineral texture for wall and floor fabrication
Bianco Sivec large slab with a fine white crystalline surface.
Bianco Sivec Marble Polished Slabs with bright white reflective stone finish
Polished Sivec Marble showing reflected light across the stone face.

Bianco Sivec Marble Slab Sizes, Thicknesses and Surface Finishes

The Bianco Sivec product catalogue includes large marble slabs and cut-to-size tiles. Common slab references begin at 2400mm × 1200mm, while larger pieces may extend beyond 2600mm × 1600mm. Usable dimensions depend on the individual slab, its edge condition and the finished cutting layout.

Produkta nosaukums Bianco Sivec Marble Slabs
Materiāls Bianco Sivec Marble Slabs, Sivec White Marble Slabs
Izcelsmes atsauce Prilepa, Ziemeļmaķedonija
Krāsa Fine White / Soft Grey Mineral Marks / Slight Tone Variation
Plāksņu Izmēru Atsauces 2400 mm+ × 1200 mm+ / 2600 mm+ × 1600 mm+
Catalogue Thicknesses 15mm / 18mm / 20mm / 25mm / 30mm
Flīžu Izmēru Atsauces 600 × 600mm / 600 × 1200mm / 1200 × 1200mm / Custom
Virsmas apdare Pulēts / slīpēts
Produkta formas Marble Slabs / Wall Panels / Floor Tiles / Vanity Tops / Stair Components
Galvenie pielietojumi Villa Interiors / Hotel Flooring / Reception Walls / Bathroom Cladding

Bianco Sivec White Marble for Residential and Hospitality Interiors

Bianco Sivec White Marble application design for interior floors and decorative wall surfaces

Bianco Sivec White Marble can be used across several connected architectural surfaces within a residential or hospitality interior. The pale stone provides a visual link between floors, wall cladding and selected custom components, particularly where a quiet white background is preferred.

In a hotel reception area, large polished wall panels can sit behind dark furniture or metal signage without adding a competing vein pattern. White marble floors may continue through an entrance hall, using tile joints and architectural divisions to organize the broad surface.

In a residential bathroom, Sivec works with porcelain basins, pale joinery and contrasting dark fittings. Wall panels can extend around vanity mirrors and bathtub surrounds, while custom countertop pieces introduce the same white stone at a smaller scale.

The application image illustrates the design direction rather than establishing performance for a particular installation. Wall fixing, flooring support and wet-area waterproofing remain separate aspects of the completed building assembly.

Polished and Honed Sivec Marble for Interior Floors and Wall Panels

Polished Sivec Marble emphasizes brightness and reflection. On vertical panels, the finish gives the white crystalline surface a luminous appearance under daylight and recessed lighting. It is particularly suited to reception walls, lift surrounds and decorative wall areas where surface reflection contributes to the design.

Honed Sivec Marble has a lower-gloss appearance and reveals the stone’s small-scale mineral pattern without the same intensity of reflected light. This finish can be considered for residential floor and wall designs where a matte white surface is preferred.

On flooring, polished marble may show fine abrasive wear, cleaning marks and reflected foot traffic more visibly than on a wall. Honing changes the appearance but does not automatically establish wet slip resistance. A floor’s suitability depends on the actual finished surface, traffic and environmental conditions.

For wall panels, the emphasis is different: white tone, joint placement and the visual transition between adjoining slabs become more important. Where the design uses broad uninterrupted surfaces, larger cut pieces can retain the fine-grained character with fewer visible joints.

Bianco Sivec Marble Physical Properties and Technical Test Reference

Bianco Sivec is a fine-grained white dolomitic marble. The following published Sivec Marble measurements provide a reference for its density, moisture absorption and mechanical strength. They describe a tested commercial material sample, not a certified laboratory report for the slabs shown on this page.

Physical Property Published Sivec Marble Reference
Apparent Density 2,848 kg/m³
Ūdens absorbcija 0.14%
Flexural Strength 14.37 MPa
Kompresijas izturība 175.62 MPa

Tehniskā atsauce: The figures above represent a published Sivec Marble specimen and are not current-batch certified results. Actual stone performance can vary with quarry selection, mineral structure and processing. The reference values alone do not establish the allowable span of a wall panel or the slip resistance of a finished marble floor.

Bianco Sivec Marble Fabrication for Floors, Bathrooms and Interior Panels

Bianco Sivec Marble Slabs can be cut into rectangular floor tiles, wall panels and coordinated architectural components. The most suitable cutting arrangement depends on how the white background will be seen across adjacent surfaces. A 600 × 600mm floor layout gives regular joints, while larger pieces can create a less interrupted marble surface.

For bathrooms, vanity tops and matching wall splashes may be fabricated from the same stone selection. Sink openings, polished edges and wall junctions influence the finished appearance and require support appropriate to the selected marble thickness.

On hotel walls, the relationship between the panel dimensions and architectural openings is particularly visible because the marble’s quiet pattern does not conceal irregular joints. Consistent white-tone grouping and an orderly panel arrangement help the stone work with the surrounding design rather than drawing attention to individual pieces.

Cleaning and Maintaining Bianco Sivec White Marble Surfaces

Bianco Sivec is a carbonate-rich marble and may be etched by acidic cleaning products. Bathroom descalers, vinegar and aggressive detergents can leave dull marks on polished surfaces. The relatively pale background can also make colored stains or dirty joints more noticeable.

Routine maintenance should use a soft cloth or suitable floor-cleaning equipment with a pH-neutral cleaner made for marble. On polished floors, removing sand and abrasive grit helps reduce visible surface wear. A compatible impregnating treatment may limit some staining risks but cannot prevent acid etching.

In bathrooms, the stone finish and the installation system serve different purposes. Waterproofing, suitable joints and an appropriate substrate are needed independently of the marble’s polished appearance or sealing treatment.

Frequently Asked Questions About Bianco Sivec Marble

[KWEN_MT_ITEM_1]Kas ir Bianco Sivec marmors?[/KWEN_MT_ITEM_1]

[Bianco Sivec Marmors ir smalkgraudains balts dolomīta marmors ar maigām pelēkām minerālu zīmējumiem. To izmanto lielām plāksnēm, iekšējiem grīdas segumiem, sienu paneļiem, tualetes virsmām un arhitektūras akmens komponentiem.].

Vai Bianco Sivec ir grieķu baltais marmors?

[Bianco Sivec Marmors ir saistīts ar karjeraem Prilepas reģionā Ziemeļmaķedonijā. To var salīdzināt ar Grieķijas baltā marmora šķirnēm, taču atzītais Sivec karjera izcelsmes valsts nav Grieķija.].

Kādi biezumi ir pieejami Bianco Sivec marmora plāksnēm?

[Kataloga biezuma atsauces ietver 15 mm, 18 mm, 20 mm, 25 mm un 30 mm. Faktiskā izvēle ir atkarīga no plāksņu krājumiem un paredzētās izgatavošanas.].

Vai Bianco Sivec marmoru var izmantot viesnīcu grīdām un sienām?

Jā. Bianco Sivec marmoru var izmantot viesnīcu iekšējām grīdām un sienu paneļiem. Grīdas apdarei un slīdesizturībai jāatbilst paredzamajai cilvēku plūsmai un mitruma līmenim, savukārt lieliem sienu paneļiem nepieciešama atbilstoša stiprināšana un balstīšana.

[KWEN_MT_ITEM_1]Kādas ir Bianco Sivec marmora fizikālās īpašības?[/KWEN_MT_ITEM_1]

A published Sivec Marble reference lists apparent density of 2,848 kg/m³, water absorption of 0.14%, flexural strength of 14.37 MPa and compressive strength of 175.62 MPa. These figures are not certified for the current slab batch.

How should polished Sivec Marble be cleaned?

Use a pH-neutral marble cleaner and non-abrasive equipment. Avoid acidic descalers and remove abrasive grit from floors. Marble sealers may reduce some staining risks but do not protect against acid etching.

Bianco Sivec Marble Compared with Four White Marble Slabs

Bianco Sivec is characterized by a relatively consistent white crystalline field. The following selections provide different degrees of grey, violet or flowing mineral movement for interior stone designs.

Marmors Stone Appearance Dizaina atšķirība
Bianco Sivec Marble Fine crystalline white surface with small grey markings Broad pale floors and quiet architectural wall panels
Oriental White Marble White background with visible soft grey mineral movement White marble surfaces with more noticeable grey texture
Ceriņu balts marmors White background with violet-grey branching veins Expressive feature walls and decorative stone surfaces
Statuario Bianco Marble White stone with stronger flowing grey veins Statement panels and more pronounced marble movement
Arabescato baltais dolomīta marmors White background with flowing and irregular grey veins Decorative wall panels with stronger mineral contrast

Recommended White Marble Slabs for Interior Projects

Oriental White Marble Slab with pale grey mineral movement

Oriental White Marble

White marble with gentle grey texture for interior walls and floors.

View More

Lilac White Marble Slabs with violet grey veins across white stone

Lilās baltās marmora plāksnes

White marble with distinctive lilac-grey veining.

View More

Statuario Bianco Marble Polished Slab with flowing grey veins

Statuario Bianco marmora plāksne

Bright white marble with pronounced grey mineral movement.

View More

Arabescato White Dolomite Marble Slabs with grey flowing veins

Arabescato White Dolomite Marmora Plāksnes

White dolomitic marble with broad grey veining.

View More

The Leading 10 Bianco Sivec Marble Slabs and Tiles Factory-Esta Stone
The Leading 10 Bianco Sivec Marble Slabs and Tiles Factory-Esta Stone

Bianco Sivec Marble Slabs for Coordinated Hotel Floors and Custom Wall Panels

Esta Stone supplies Bianco Sivec Marble for interior projects requiring a consistent white stone appearance across several architectural components. Large marble slabs can be arranged for reception walls, lift surrounds and decorative panels, while cut-to-size flooring formats allow the white material to continue into entrance halls and adjoining spaces. Grouping slabs by white tone and mineral distribution helps maintain a coherent visual appearance where several finished surfaces meet.

For hotel and residential projects, full-slab photographs, panel schedules and cutting layouts can be used to coordinate the selected material before fabrication. Floor tile dimensions, wall joints, exposed edges and matching vanity pieces can be considered within one stone package, reducing visual differences between adjoining components. This approach is particularly relevant to Bianco Sivec because slight changes in white background tone are more noticeable on broad, relatively unpatterned surfaces.

Lūgt cenu piedāvājumu Skatīt marmora plāksnes

Jums varētu arī patikt

Nosūtīt pieprasījumu

Pieprasījums