Quick Summary
실버 석회화 석판 are natural Italian vein-cut travertine with a silver-grey base, cream and beige layering, darker mineral bands, and the open-pore character typical of travertine. They are supplied for wall panels, floor tiles, hotel interiors, bathrooms, vanity tops, stairs, reception areas, and custom cut-to-size work. Filled, honed, polished, or brushed finishes can be selected according to the application. For project orders, current slab photos, vein direction, pore treatment, thickness, and dry-lay sequence should be approved before fabrication.
Silver Travertine Slabs for Hotel Walls, Floors, Bathrooms, Vanity Tops, and Cut-to-Size Projects
Silver Travertine is chosen when a project needs a grey travertine with clear linear movement rather than a flat, uniform surface. Vein cutting exposes long silver-grey, cream, beige, taupe, and darker mineral bands, giving wall elevations and floor fields a directional architectural rhythm.
The same material direction may appear in sourcing documents as Silver Travertine, Travertino Silver, Roman Silver Travertine, Grey Travertine, or Silver Grey Travertine Slab. For procurement, the commercial name is less important than approving the actual slab batch, pore condition, finish, and vein sequence that will be fabricated for the project.
- Suitable for hotel lobbies, villa walls, flooring, bathrooms, vanity tops, stairs, reception areas, and custom cut-to-size stone packages.
- Confirm full slab photos, visible-face direction, filling requirement, finish, and dry-lay logic before cutting large matched areas.
Review Silver Grey Travertine Slab Tone Before Cutting
Two slabs from the same commercial selection may still differ in the width of grey bands, the amount of cream or brown movement, pore frequency, and repaired areas. Large hotel walls, elevator lobbies, staircase runs, and bathroom elevations should therefore be approved by slab number or batch group, not by color name alone.
Silver Grey Travertine Slab Selection: Vein Direction, Pores, and Batch Tone
Travertine is naturally porous, so the appearance of a finished surface depends on both the stone and the filling process. A filled honed slab reads smoother and quieter, while an unfilled or more textured surface keeps stronger relief. The filler color also matters: a close tone keeps the surface calm, whereas a contrasting fill can make individual pores more visible.
For cut-to-size production, establish the visible face, grain direction, panel orientation, joint position, and acceptable tone range before cutting. If several rooms share the same material, separate the slab allocation by area so highly visible walls and vanity pieces can be matched deliberately instead of being selected after fabrication.
Silver Travertine Slabs Specification for Walls, Floors, Vanity Tops, and Cut-to-Size Work
| 제품 이름 | 실버 석회화 석판 |
| 재질 | Natural Italian travertine with vein-cut grey, cream, beige, and darker mineral layering |
| Alternate Sourcing Names | Silver Travertine, Travertino Silver, Roman Silver Travertine, Grey Travertine, Silver Grey Travertine Slab |
| Standard Slabs | 2400up × 1200upmm, 2800up × 1500upmm, or based on current slab availability and project request |
| 두께 | 20mm, 30mm |
| 완료 | Polished, honed, brushed |
| 모공 관리 | Filled or unfilled according to approved sample, finish, cleaning requirement, and project location |
| MOQ | 100㎡ |
| 가공 | Slabs, Silver Travertine Tiles, wall panels, vanity tops, countertops, stair pieces, skirting, and custom cut-to-size components |
| Project Use | Hotel lobbies, feature walls, floor fields, bathrooms, vanity tops, stairs, reception areas, villas, and selected countertop applications |
Choose Filled, Honed, Polished, or Brushed Silver Travertine by Application
Finish selection changes how Silver Travertine reads under light and how easy the surface is to maintain. The decision should follow the actual installation zone rather than using one finish for an entire project by default.
- Silver Travertine Filled: filling closes the most visible pores and gives floors, bathroom walls, vanity pieces, and frequently cleaned areas a more controlled surface. Confirm filler color and final polish or hone on a sample.
- Silver Travertine Honed: a low-reflection surface that softens contrast between grey and cream bands. It is commonly considered for hotel floors, bathroom walls, spa interiors, stairs, and large architectural surfaces.
- Silver Travertine Polished: increases color depth and vein contrast. Use it where reflection is acceptable and where the project can manage the maintenance and slip implications of a smoother surface.
- Brushed or more textured finishes: useful where a stronger tactile surface is wanted. Exterior or wet walking areas still require project-specific slip, drainage, climate, and installation review.
Silver Travertine Slabs for Hotel Lobby Floors and Wall Tiles
Hotel lobby projects expose the strongest visual advantage of vein-cut Silver Travertine: long horizontal bands can run through adjacent panels and floor modules to create a controlled architectural rhythm. That effect depends on shop drawings and dry-lay planning; random cutting can break the continuity even when every piece comes from the same block.
For walls, confirm elevation dimensions, joint locations, return details, corner treatment, fixing method, and the direction of the linear veins. For floors, review calibration, finish, slip expectations, traffic level, grout width, movement joints, spare pieces, and protection during later construction trades.
- Number panels and floor pieces according to the approved dry-lay or elevation.
- Group visually compatible slabs before cutting large public areas where tone changes are easy to notice.
Silver Travertine Tiles and Vanity Tops for Bathroom Projects
Bathrooms combine visual matching with wet-area detailing. Silver Travertine wall tiles can be arranged so the linear vein continues around a vanity wall, shower return, bathtub surround, or feature panel, but the final effect should be planned from elevations rather than improvised during installation.
For vanity tops, provide finished dimensions, sink type, sink cutout, faucet-hole positions, backsplash height, edge profile, seam location, overhang, and cabinet support. The selected slab area should be reviewed before cutting because a strong pore, repair, or dark vein can land close to a narrow bridge around a basin opening if the layout is not controlled.
- Confirm waterproofing, grout, sealant joints, ventilation, sealing, and pH-neutral maintenance for wet zones.
- Use a finish appropriate to the walking surface; polished stone should not be specified for wet floors without a project slip review.
Factory Support, Dry-Lay Review, Inspection, and Packing for Silver Travertine Projects
Silver Travertine procurement is easier to control when material approval and fabrication review are treated as one workflow. The useful factory checkpoints are not generic marketing claims; they are the points that determine whether the delivered stone can be installed according to the drawings.
- Current slab photos with slab numbers, usable dimensions, grey-to-warm tone range, visible repairs, pore structure, and vein direction.
- Approved finish and filling sample before bulk production, especially where Silver Travertine Filled and Silver Travertine Honed surfaces must remain visually consistent.
- Cutting-list and shop-drawing review for wall panels, floor tiles, stairs, vanity tops, countertops, skirting, and special returns.
- Dry-lay or elevation review for areas requiring continuous vein direction, batch grouping, room labels, or installation sequence.
- Dimensional and visible-face inspection before packing, followed by clear piece numbering, face protection, edge protection, crate identification, and inspection photos according to the confirmed order requirements.
Common Specification Mistakes with Silver Travertine Slabs
- Approving the stone from one close-up sample without checking full slab tone, pore distribution, repairs, and the width of the linear bands.
- Starting wall-panel cutting before the final elevation establishes vein direction, panel numbers, joint positions, corner returns, and visible faces.
- Treating filled, honed, polished, and brushed surfaces as interchangeable even though they change reflection, pore visibility, cleaning, and slip behavior.
- Using polished material on wet walking surfaces without an appropriate slip review for the project and local installation requirements.
- Cutting vanity tops before sink, faucet, backsplash, edge, seam, and support details are fully approved.
- Mixing noticeably different slab groups across one large wall or floor field without an approved transition or dry-lay plan.
Care and Maintenance for Filled or Honed Silver Travertine
Silver Travertine is a calcium-based natural stone. Routine cleaning should use a pH-neutral stone cleaner, soft cloth, or soft mop rather than vinegar, lemon-based products, acidic bathroom cleaners, strong descalers, or abrasive pads. Acidic liquids can etch calcite-bearing stone even when the surface has been sealed.
Sealing requirements depend on the finish, filling condition, exposure, traffic, and installer recommendation. On bathroom vanities and other frequently used surfaces, wipe spills promptly and protect the stone during construction so grout haze, metal dust, pigments, adhesives, and later trade work do not become the first maintenance problem after installation.
Silver Travertine Slabs FAQs
실버 트라버틴 슬래브란 무엇인가요?
실버 트라베르틴 슬래브는 선형의 은회색, 크림색, 베이지색 및 어두운 색조의 미네랄 무늬와 특유의 기공이 돋보이는 이탈리아산 천연 트라베르틴 슬래브입니다. 벽 패널, 바닥 타일, 세면대 상판, 조리대, 계단 및 기타 맞춤 재단 건축 부재로 가공할 수 있습니다.
실버 트라버틴과 트라베르티노 실버는 같은 원산지 방향인가요?
트라베르티노 실버, 로만 실버 트라베르틴, 실버 트라베르틴, 그리고 실버 그레이 트라베르틴은 시장에서 사용되는 용어로, 이들 모두는 은회색 계열의 트라베르틴 제품군을 지칭합니다. 두 상업용 명칭을 완전히 동일한 것으로 간주하기 전에, 해당 제품의 정확한 채석지, 색조, 기공 구조 및 무늬 대비는 반드시 최신 슬래브 사진을 통해 확인해야 합니다.
실버 트라버틴 슬래브를 호텔 로비의 벽과 바닥에 사용할 수 있나요?
네. 마감재, 두께, 기판, 이음새 배치, 미끄럼 방지 요구사항, 건식 시공 순서 및 무늬결 방향이 해당 프로젝트에 적합하도록 승인된 경우, 대형 로비 벽면 패널 및 바닥 필드에 매우 적합합니다.
실버 트래버틴 충진재와 비충진재의 차이점은 무엇인가요?
충전재가 있는 재료는 승인된 충전제로 눈에 보이는 기공을 메워 더 매끄러운 표면을 만들어 일반적으로 세척이 용이합니다. 비충전 재료는 자연스러운 공극과 질감을 더 많이 유지합니다. 선호되는 상태는 마감 처리, 사용 목적, 세척 요구 사항 및 디자인 의도에 따라 달라집니다.
실버 트라버틴 호네드와 실버 트라버틴 폴리시 중 어떤 것을 선택해야 할까요?
연마 처리된 트라버틴은 반사율이 낮아 대형 벽면과 바닥에서 일반적으로 부드러운 느낌을 줍니다. 광택 처리된 트라버틴은 색상의 깊이와 무늬의 대비를 높여줍니다. 젖은 상태나 보행이 이루어지는 바닥 표면은 외관만을 고려하기보다는 요구되는 미끄럼 방지 성능에 따라 선택해야 합니다.
Can Silver Travertine be fabricated into vanity tops?
Yes. For vanity tops, confirm the finished size, sink opening, faucet holes, backsplash, edge profile, seam position, overhang, cabinet support, finish, filling condition, and selected slab area before fabrication.
What should be approved before ordering Silver Travertine Slabs?
Approve current slab photos, usable slab sizes, thickness, finish, filling, tone range, vein direction, drawings, cut-to-size dimensions, dry-lay requirement, inspection points, packing identification, and the destination and installation requirements relevant to the project.
Recommended Travertine Products from Esta Stone
이탈리아 레인 크라우포드 트라버틴 석판 타일
Warm beige and brown travertine with natural pores and varied veining for floors, wall cladding, stairs, countertops, and architectural interiors.
이란산 울트라 화이트 트래버틴
Light white travertine with straighter linear movement for buyers comparing pale stone directions for walls, floors, countertops, and bathroom work.
이탈리아 슈퍼 화이트 트라버틴 판재
A light-toned Italian travertine option for comparing brighter wall, floor, and cut-to-size material directions against silver-grey selections.
오션 블루 석회화
Italian travertine with blue-grey, silver, beige, and taupe movement for walls, floors, bathrooms, stairs, and other cut-to-size applications.
Request Silver Travertine Slabs Photos, Finish Options, and Project Quotation
For an accurate review, send the project application, required quantity, preferred slab or finished-piece size, thickness, finish, filling requirement, vein direction, drawings, and whether the material will be used for walls, floors, stairs, Silver Travertine Tiles, vanity tops, countertops, or bathroom work.
- Required slab quantity or finished square meters
- 20mm or 30mm thickness and polished, honed, or brushed finish
- Filled or unfilled pore treatment and approved filler direction
- Wall elevations, floor layouts, stair drawings, or vanity-top shop drawings
- Dry-lay, vein continuity, inspection, packing labels, destination port, and project schedule requirements
| Request Silver Travertine Slabs Quote | View Travertine Collection |















