Skúsenosti a kvalita mramoru, žuly, luxusného kremeňa, inžinierstva Quartz Factory v Číne
Profesionálne biele mramorové dlaždice a umelý mramor Výrobca

Beige Travertine Pedestal Sinks

Kategórie

Kontaktujte nás

Beige Travertine Pedestal Sinks

Beige Travertine Pedestal Sinks are freestanding cylindrical natural stone washbasins with warm cream-beige layering and a circular recessed bowl. The featured unit stands 34 inches high with a 16-inch outside diameter, making it suitable for hotel spa washrooms, villa powder rooms and boutique hospitality bathrooms. A 1.75-inch drain opening and approximately 300 lb weight require coordinated plumbing, floor support and handling arrangements. Basin depth, overflow configuration, faucet selection and the underside construction should be confirmed on the approved technical drawing.

Materiál Natural Beige Travertine
Forma produktu Cylindrical Freestanding Washbasin
Overall Height 34 inches
Outside Diameter 16 inches
Drain Opening 1.75 inches
Approx. Weight 300 lb
Projektové aplikácie Hotels / Spas / Villas / Powder Rooms

Popis

Rýchly prehľad

Beige Travertine Pedestal Sinks are freestanding cylindrical washbasins made from natural beige travertine, with a circular bowl and visible horizontal stone layering. The featured model measures 34 inches high and 16 inches in outside diameter, with a 1.75-inch drain opening and an approximate weight of 300 lb. This floor-standing format suits villa powder rooms, hotel spa washrooms and boutique hospitality bathrooms where a separate vanity cabinet is not required. The installation needs a suitable floor-bearing arrangement, coordinated drainage and an approved method of securing the finished fixture.

Beige Travertine Pedestal Sinks for Hotel Spas and Villa Bathrooms

Beige Travertine Pedestal Sinks showing a tall cylindrical natural stone basin with horizontal cream-beige bands

Beige Travertine Pedestal Sinks combine a circular washing bowl with a full-height cylindrical exterior. The featured basin has a simple vertical outline, a rounded upper rim and horizontal cream-beige stone bands extending around the visible surface.

Unlike a vessel sink placed on a countertop, this fixture stands at its intended washing height without a separate vanity cabinet beneath the bowl. Its 34-inch overall height makes the cylinder itself the principal bathroom fitting, while the 16-inch outside diameter defines its floor footprint.

The natural travertine layers remain visible around the curved surface. Faint cream, ivory and beige bands vary in thickness and direction, with occasional darker mineral markings and small natural pores characteristic of the material.

For boutique hotels and spa washrooms, the cylindrical profile can be positioned as a standalone basin against a finished wall or within an open bathroom layout. The design requires enough clearance for approach, handwashing and cleaning around the base.

A freestanding basin also changes the way the room is serviced. There is no conventional cabinet to hide pipework or provide storage. The faucet supply, waste connection and any access provision must be coordinated with the chosen bathroom layout.

The photographed unit has a recessed circular bowl rather than a broad flat countertop. Bowl depth, internal diameter, underside construction and overflow arrangement are separate dimensions that must be confirmed before the pedestal is approved for installation.

Beige Travertine Freestanding Basin Dimensions and Product Specifications

The featured pedestal has four supplied reference measurements: 34 inches overall height, 16 inches outside diameter, a 1.75-inch drain opening and approximately 300 lb unit weight. The weight should be treated as an estimate until the completed sink is weighed for shipment and installation planning.

Názov produktu Beige Travertine Pedestal Sinks
Materiál Natural Beige Travertine
Klasifikácia kameňov Natural Carbonate Sedimentary Stone
Farba Ivory / Cream Beige / Light Tan
Basin Shape Circular Recessed Bowl
Body Profile Vertical Cylinder / Floor-Standing Pedestal
Overall Height 34 inches
Outside Diameter 16 inches
Drain Opening 1.75 inches; Confirm Fitting Compatibility
Approximate Weight 300 lb per Unit
Vzhľad povrchu Smooth, Low-Gloss Travertine Appearance in Product Images
Faucet Type Wall-Mounted or Separate Freestanding Faucet by Layout
Overflow Not Confirmed; Check Technical Drawing
Inštalácia Floor Standing with Approved Stability and Support Details
Aplikácia Hotel Spas / Villas / Powder Rooms / Resort Washrooms

The dimensions above describe the featured product. The internal bowl depth, wall thickness, bottom contact geometry, drain exit route, machining details and final unit weight are not established by these four reference measurements.

Natural Beige Travertine: Cylinder Texture, Pore Filling and Surface Finish

Beige Travertine Pedestal Cylinder Sinks with circular stone bowl and natural layered beige surface

Travertine forms through the precipitation of carbonate minerals and often contains layers, open pores and small cavities. These features account for the distinctive surface of a Beige Travertine Cylinder Vanity Sink, but their distribution is not identical from one stone piece to another.

The horizontal lines are especially noticeable on a tall cylindrical object. As the surface curves away from the viewer, the bands remain visible around the body, giving the basin a different appearance from a sink made with plain white ceramic or uniformly colored solid-surface material.

The treatment of natural pores is a practical bathroom requirement. Some travertine surfaces retain visible pits, while others are filled and smoothed. The chosen treatment affects cleaning, water exposure and the ability to keep soap deposits from accumulating in small cavities.

The recessed bowl needs particular attention. Its internal face receives direct water exposure, so the finish and any pore-filling materials must be suitable for repeated handwashing. The appearance of the outside cylinder and the inside bowl can be coordinated without assuming they require identical surface treatment.

The product photography has a restrained, low-gloss appearance. That is useful for design selection, but a photograph is not sufficient to determine whether the supplied stone is formally honed, brushed or finished by another process.

Surface finish should be approved from the actual completed sink or a representative sample. For matching hotel washrooms, the acceptable cream-beige color range and the character of the travertine bands should be established before repeated units are produced.

Freestanding Travertine Sink Construction: Solid Appearance Versus Internal Geometry

The cylindrical exterior creates the appearance of a substantial stone pedestal. However, the words Beige Travertine Solid Vanity Sinks do not establish how much stone remains inside the body or whether the fixture was carved from a single block.

A tall natural stone sink may have a recessed bowl, a hollow section for plumbing or other internal machining. The actual arrangement must be shown in sectional drawings. This is particularly relevant when the approximate finished weight is 300 lb.

The outside diameter is measured across the full cylinder. It does not identify the thickness of the upper rim, the depth of the basin or the diameter of any internal cavity. Those details influence both the finished mass and the position of the plumbing fittings.

Any construction joints also need to be identified. A multi-piece assembly and a carved single-piece basin require different inspection methods, even if they have a similar outward appearance.

For project approval, an underside photograph and a vertical section through the drain are valuable. They clarify how the basin is supported, where the waste line runs, and whether access is available after the pedestal is positioned.

Beige Travertine Floor Standing Sinks: Planning for a 300 lb Fixture

Beige Travertine Freestanding Cylinder Sinks displaying a tall cylindrical stone body and recessed round basin

A 300 lb natural stone pedestal requires more installation planning than a lightweight ceramic basin. The fixture must be delivered to its final position without placing its full weight on an unprotected edge or creating uncontrolled pressure on a fragile floor finish.

The actual load path begins at the underside of the pedestal. Although the outside cylinder measures 16 inches in diameter, its complete circular footprint may not be in uniform contact with the floor. The bottom geometry and supporting surface need to be examined together.

The floor assembly must be assessed for the installed unit, the water and fittings, and the loads that may occur during use. Where the basin is placed over a suspended floor, raised platform or underfloor services, the supporting construction needs particular attention.

Stability matters as much as vertical support. A tall narrow fixture can be exposed to unintended sideways forces when somebody leans against the rim. An appropriate restraint or anchoring method may be necessary, but it should not be invented from the product photograph.

The installation team should also establish the delivery route. Door openings, elevators, stairs, finished floor protection and lifting equipment are relevant for an approximately 300 lb stone object.

Temporary packaging foam, display pads or transport supports shown beneath a product are not a finished mounting detail. The installed sink must rest on the support arrangement approved for its actual underside construction and the building floor.

1.75-Inch Drain Opening and Faucet Coordination for Travertine Cylinder Sinks

The featured basin includes a 1.75-inch drain opening. That is a hole-size reference, not proof that every waste fitting will connect correctly. The drain assembly, sealing surface and available space below the bowl must match the finished stone geometry.

The product photograph does not show a conventional faucet hole on a broad rear countertop deck. A wall-mounted spout or a separate floor-mounted faucet may suit the design, depending on the room layout and the final bowl position.

Plumbing Detail Required Information Installation Implication
Drain Opening 1.75-inch opening and actual sealing geometry Confirm the selected waste fitting and gasket arrangement
Overflow Provision Whether the completed basin has a functional overflow Choose a compatible drain configuration; do not assume overflow compatibility
Waste Exit Exact underside outlet and internal pipe route Coordinate floor or wall rough-in and connection access
Faucet Position Wall-mounted or separate freestanding spout location Set the correct spout reach, height and water entry point
Trap and Maintenance Trap type, service clearance and accessibility Avoid inaccessible connections beneath a heavy installed pedestal
Floor Penetrations Waterproofing, fixing points and finished-floor details Protect the wet-area assembly and coordinate structural penetrations

For a basin without a confirmed overflow, the purchaser should not automatically order a drain fitting intended for an overflow-equipped ceramic sink. The chosen component must be compatible with the actual bowl and applicable plumbing requirements.

The final faucet position should be checked with the finished basin depth. Spout reach, flow rate and distance to the bowl surface affect splash performance. A beautiful cylinder can still be inconvenient to use if its faucet is positioned too far from the center of the bowl.

Beige Travertine Cylinder Vanity Sinks: Bowl and Rim Fabrication

Beige Travertine Floor Standing Cylinder Sinks showing the round rim and recessed natural stone washbasin

The circular bowl is an important part of the product’s usability. Its inner wall needs a suitable finish, and the transition from the bowl floor to the drainage opening must allow water to leave without persistent pooling.

The upper rim should be examined for thickness consistency, smoothness and small natural cavities close to the edge. Sharp mineral discontinuities or open pores in an exposed rim may require additional finishing or appropriate treatment.

A cylindrical exterior also requires dimensional control. The top opening should appear centered relative to the outside circle, and the visible side should not show unintended distortions that make the sink appear out of vertical alignment.

Natural travertine layers may become more prominent after machining. At the inner bowl, the direction of mineral lines can differ from the appearance on the outer cylinder because the stone is cut on a curved surface.

For a repeated hospitality order, inspect a completed unit for finished rim dimensions, basin depth, surface treatment, drain opening, overall height and approved underside details. A raw stone sample cannot establish the tolerances of a finished sanitary fixture.

The finished basin also needs an appropriate water-retention and drainage check. Stone absorption performance, even when known, is separate from the performance of the drain seal and any joint in the fixture’s construction.

Where Beige Travertine Pedestal Basins Fit Hospitality and Residential Projects

The cylinder is best evaluated where the room does not require storage directly beneath the basin. The installation must still accommodate drainage, floor loading and sufficient clearance around the fixture.

Project Setting Installation Arrangement Key Buyer Check
Boutique Hotel Suite Single floor-standing basin beside a finished wall Faucet location, guest clearance and housekeeping access
Resort Spa Washroom Standalone basin within a tiled or stone-finished wash area Wet-area protection, surface cleaning and floor construction
Villa Powder Room Single cylinder basin with coordinated wall-mounted faucet Room circulation, mirror height and rough-in positions
Private Guest Bathroom Compact freestanding washbasin without vanity storage Service access and adequate space for daily use
Hotel Renovation Replacement pedestal coordinated with existing plumbing As-built floor capacity, waste alignment and delivery route

This format should not automatically be specified as an accessible washbasin for every public bathroom. Required knee clearance, fixture reach and accessibility provisions must be reviewed against the applicable project standards.

Beige Travertine Floor Standing Sinks for Spas and Hotel Bathrooms

The following image illustrates a freestanding beige travertine cylinder basin in a spa or hotel washroom setting. It is an interior application reference, not verification of a completed Esta Stone project or of the support and plumbing used in that pictured installation.

Beige Travertine Floor Standing Cylinder Sinks in a spa and hotel bathroom design with a freestanding stone washbasin

In a hotel spa, the circular basin may be set against a stone or plaster wall without a conventional cabinet. This leaves the full cylindrical surface visible but also makes the relationship between the fixture, faucet and floor finish more prominent.

The wall behind the basin can accommodate a suitable spout and mirror, while floor-mounted faucets may require more space around the cylinder. The choice affects the location of supply lines, waterproofing penetrations and maintenance access.

Where several guest bathrooms use the same product, fixture positions should be standardized on approved installation drawings. Minor changes to the waste outlet location can have a larger effect on a heavy pedestal than on a sink installed inside a serviceable vanity cabinet.

The final room layout should allow staff to clean the perimeter and service the plumbing without exposing the stone to harsh descaling chemicals or repeatedly moving the finished pedestal.

Travertine Pedestal Sink Material Testing and Finished-Product Acceptance

Natural travertine is not a uniform manufactured material. Its density, porosity, water absorption and mechanical characteristics vary with the deposit, block and surface treatment. Material testing for architectural travertine commonly uses standards such as EN 1936, EN 13755, EN 1926 and EN 12372.

For this particular pedestal sink, no matching lot-specific laboratory values have been supplied. The finished product should therefore be reviewed using its actual construction, rather than borrowing numerical strength or absorption results from an unrelated beige travertine selection.

The basin’s performance also depends on details that bulk stone tests do not establish: the integrity of the carved bowl, watertightness at the drain, the treatment of natural pores and the stability of the installed pedestal.

For hotel or spa specifications requiring documented physical performance, the project buyer should request applicable stone material records and agreed finished-unit inspection criteria for the approved production lot.

Travertine Pedestal Basin Inspection and Export Packing

For a finished cylinder sink, quality inspection must address the basin as a sanitary fixture, not simply as a decorative stone object. The critical inspection points concern the actual geometry, drainage connection, stone condition and safe delivery.

Stone Surface Inspect the beige tone, horizontal layers, natural pores, filled areas and the consistency of the approved finish.
Overall Geometry Check the 34-inch height, 16-inch diameter, top rim, bowl alignment and vertical cylinder shape against the approved drawing.
Basin and Drain Confirm the 1.75-inch opening, internal bowl finish, selected drain compatibility and appropriate water-flow testing.
Base and Stability Review bottom support geometry, any fixing provisions and potential movement according to the approved installation arrangement.
Finished Weight Confirm actual shipment mass for lifting, floor planning and transport documentation; 300 lb remains an approximate product reference.
Exportné balenie Protect the bowl rim, support the cylinder securely, prevent contact with crate hardware and restrain movement during transport.

The packing method should account for the finished sink’s center of mass and vulnerable upper rim. A heavy cylindrical object requires stable handling at loading, unloading and final positioning, with the crate and lifting plan approved for the actual completed unit.

Cleaning, Sealing and Daily Care for Beige Travertine Pedestal Sinks

Travertine is a carbonate-based stone and can react to acidic cleaning products. Use a pH-neutral cleaner suitable for natural stone. Avoid vinegar, acidic bathroom descalers and abrasive pads, especially on the finished inside surface of the bowl.

Natural pores may need appropriate filling or sealing depending on the selected finish and stone condition. A compatible impregnating treatment can help manage some staining risks, but it does not prevent acid etching or eliminate the need to keep the basin clean.

The rounded rim and the drainage area are the principal hand-contact and water-contact surfaces. Remove soap residue and mineral deposits with methods approved for the stone finish, and inspect any pore filling or sealant that begins to deteriorate.

Avoid moving the pedestal for routine cleaning. Its approximate 300 lb weight requires proper lifting and handling arrangements if the basin must be repositioned for maintenance or building work.

Frequently Asked Questions About Beige Travertine Pedestal Sinks

What are Beige Travertine Pedestal Sinks?

Beige Travertine Pedestal Sinks are freestanding natural stone washbasins with a tall cylindrical exterior and recessed circular bowl. The featured model has visible cream-beige travertine layers and is intended for suitable hotel, spa and residential bathroom installations.

What are the dimensions and weight of this travertine pedestal sink?

The featured sink is 34 inches high and 16 inches in outside diameter, with an approximate weight of 300 lb. The internal bowl dimensions, finished unit weight and underside construction should be checked against the approved technical drawing.

Does the 1.75-inch drain opening fit a standard bathroom waste?

The sink has a supplied 1.75-inch drain-opening reference, but compatibility depends on the chosen drain fitting, sealing arrangement, overflow configuration and waste connection. Confirm these details before purchasing the plumbing components.

Can a 300 lb beige travertine sink stand directly on a bathroom floor?

The bathroom floor and the fixture’s stability arrangement must be assessed for the completed pedestal and expected use. Confirm the base contact, structural capacity and any required restraint or anchoring before installation. A product photograph does not establish that the sink can be installed without additional support.

Can Beige Travertine Freestanding Basins be used in hotel spas?

They can be considered for hotel spa washrooms and suites when the floor, plumbing, water protection, cleaning access and fixture arrangement meet the project requirements. Accessibility and public-use provisions must be assessed separately where applicable.

What is needed to request a Beige Travertine Pedestal Sinks quotation?

Provide the required quantity, destination, surface finish, dimensions and project application. Include the faucet model, drain specification, waste rough-in, floor details and any required modifications, together with the requested inspection and packing arrangements.

Beige Travertine Pedestal Sink Selection for Hospitality Bathrooms

This 34-inch cylindrical washbasin is a finished stone fixture whose installation depends on more than its exterior appearance. The 16-inch footprint, approximately 300 lb mass and 1.75-inch drain opening must be coordinated with the bathroom structure and plumbing. The selected travertine finish should also be suitable for repeated water exposure and routine cleaning. For project orders, a completed-product drawing and an approved installation detail are more useful than choosing the sink from a material photograph alone.

Beige Travertine Pedestal Sinks Compared with Four Stone Basin Designs

The related products differ in their material appearance and fixture construction. A freestanding cylinder, a stone pedestal and a vanity-integrated basin may require different plumbing and support arrangements even when all are intended for bathrooms.

Produkt Material Appearance Fixture Form Project Consideration
Beige Travertine Pedestal Sinks Cream-beige layered travertine 34-inch freestanding circular cylinder Heavy floor support, drainage and stability
Umývadlá na podstavci zo zeleného mramoru Green natural marble with contrasting mineral movement Freestanding stone pedestal Color selection, fixture dimensions and floor installation
Umývadlo na podstavci z mramoru Rosso Levanto Dark burgundy-red marble with pale veins Decorative marble pedestal basin Stone vein placement, support and drain layout
Cloisonne Blue Bathroom Vanity Blue-toned decorative stone Custom stone vanity fixture Vanity dimensions, mounting and fixture integration
Integrované umývadlá z mramoru Ice Age Onyx Pale onyx with white-grey mineral movement Integrated stone washbasin assembly Basin assembly, support and sealing details

Recommended Natural Stone Pedestal Sinks and Bathroom Vanities


Green Marble Free Standing Pedestal Sinks made from decorative natural green marble

Umývadlá na podstavci zo zeleného mramoru

Green natural stone freestanding basins for bathrooms with a darker material palette.


Rosso Levanto Marble Pedestal Sink in dark burgundy red natural stone with contrasting veins

Umývadlo na podstavci z mramoru Rosso Levanto

Deep red marble pedestal for individually specified decorative washrooms.


Cloisonne Blue Stone Bathroom Vanity showing a blue decorative natural stone basin design

Cloisonne Blue Bathroom Vanity

Blue decorative stone vanity for custom bathroom fixture layouts.


Ice Age Onyx Marble Integrated Basins featuring pale white grey and cream natural stone

Integrované umývadlá z mramoru Ice Age Onyx

Light-colored onyx basin assemblies for specified vanity and washroom projects.

The Leading 10 Beige Travertine Pedestal Sinks and Vanity Tops Factory-Esta Stone

Request Beige Travertine Pedestal Sinks Pricing and Installation Details

Pre Beige Travertine Pedestal Sinks quotation, provide the required quantity, delivery destination, bathroom project type and any changes to the 34-inch height or 16-inch diameter. Include the selected faucet, 1.75-inch drain fitting requirement, floor and waste rough-in drawings, surface finish and installation conditions. For hotel or spa orders, request a completed-unit inspection covering the bowl, underside geometry, approximate weight and export packing method.

Mohlo by sa vám tiež páčiť

Odoslať dopyt

Dopyt