Kokemus ja laatu marmori, graniitti, Luxury kvartsiitti, Engineered Quartz Factory Kiinassa
Professional valkoinen marmori laatat ja keinotekoinen marmori valmistaja

Noce-travertiinilaatta

Kategoriat

Ota yhteyttä

Noce-travertiinilaatta

Noce-travertiinilaatta on lämmin saksanpähkinänruskea luonnontravertiini, jossa on kerma-, beige-, harmaa- ja silloin tällöin punertavaa mineraalivaihtelua. Poikittaisleikatut valinnat näyttävät pehmeämpiä pilvimäisiä huokosia, kun taas suonileikatut materiaalit luovat voimakkaampaa lineaarista liikettä. Sitä käytetään sisätilojen lattioihin, kylpyhuoneiden seiniin, portaikkoihin, tehosteseiniin, julkisivuihin, terasseille ja muuhun verhoiluun. Nykyinen Esta Stone -sivu listaa 600 × 600, 600 × 1200 ja 1200 × 1200 mm laattaviitteitä kiillotetuilla, hionneilla ja tumbled-viimeistelyillä.

Materiaali Noce-travertiini
Alkuperäviite Turkki; vahvista nykyinen tuotantoalkuperä projektiesitysten varalta
Väri Saksanpähkinänruskea / beige / kerma harmaalla tai punertavalla luonnonvaihtelulla
Laattaviite 600 × 600 / 600 × 1200 / 1200 × 1200 mm
Paksuus 15 / 18 / 20 / 25 / 30 mm
Viimeistely Kiillotettu / hiontu / tumbled; täytetty tai täyttämätön käyttöön sopivasti
Pääkäyttötarkoitus Lattiat / seinät / kylpyhuoneet / portaat / julkisivut / terassit / verhoilu

Kuvaus

Pikaesite

Noce-travertiinilaatta is a walnut-brown natural travertine with cream, beige, grey, and occasional reddish variation. Cross-cut pieces show softer cloud-like pores, while vein-cut selections produce a more linear banded pattern. It is used for floors, wall cladding, bathrooms, stairs, façades, terraces, and hospitality or villa interiors.

The current Esta Stone page lists 600 × 600, 600 × 1200, and 1200 × 1200 mm tile references, thicknesses from 15 to 30 mm, and polished, honed, or tumbled surfaces. Filled or unfilled pore treatment should be selected according to the installation, finish, maintenance, and exposure.

Noce Travertine Tile polished walnut brown natural travertine for floor and wall projects

Polished Noce Travertine reference showing the warm brown field, natural pores, and cream-to-grey tonal movement.

Noce Travertine Tile for Interior Floors, Wall Cladding, Bathrooms, and Exterior Projects

Noce Travertine is a brown travertine commonly supplied from Turkey, with colors ranging from light milk-chocolate and beige to deeper walnut brown. Cream, grey, red-brown, and pale mineral areas can appear within the same production range. Natural pores and fossil-related structure are part of the material rather than defects.

The stone can be processed as cross-cut or vein-cut. Cross-cut tiles expose a softer, cloud-like pore pattern; vein-cut pieces show stronger linear bands running through the stone. That choice changes the visual rhythm substantially, especially on large floors, stair runs, hotel corridors, or full-height wall cladding.

  • Warm brown travertine for floors, walls, stairs, bathrooms, façades, terraces, and landscape details.
  • Cross-cut and vein-cut directions produce distinctly different pattern structures.
  • Filled, unfilled, polished, honed, and tumbled selections can be matched to interior or exterior project conditions.

Brown Noce Travertine: Cross-Cut Pores, Vein-Cut Bands, and Tile-to-Tile Variation

Brown Noce Travertine Tile with walnut beige cream and natural pore variation
Noce Travertine Wall Tile in warm brown natural stone for cladding and interior feature walls

Noce Travertine is not a flat brown tile. Some pieces are lighter and creamier, while others carry deeper walnut zones, red-brown accents, grey areas, stronger pores, or more linear banding. Large installations should therefore be blended before fixing. For vein-cut cladding, the direction should be marked consistently so the bands do not rotate randomly from one panel to the next.

Noce Travertine Tile Specification for Floors and Walls

Tuotteen nimi Noce-travertiinilaatta
Materiaali Noce Travertine / Brown Travertine
Alkuperäviite Turkey is the principal commercial source used for published Noce technical references; confirm current production source for project submittals
[VÄRIKUVAUS] Light brown to walnut brown with beige, cream, grey, occasional red-brown tones, natural pores, and fossil-related movement
Current Page Tile Sizes 600 × 600 / 600 × 1200 / 1200 × 1200 mm
Current Page Thickness 15 / 18 / 20 / 25 / 30 mm
Current Page Finish Polished / honed / tumbled
Porehoito Filled or unfilled according to finish, interior / exterior use, maintenance strategy, and approved sample
Leikkaussuunta Cross-cut for cloud-like pore structure / vein-cut for linear banding
Current Page MOQ 300 NELIÖMETRIÄ
Pääsovellukset Interior flooring, wall cladding, bathrooms, stair treads and risers, hotel corridors, villa interiors, façades, terraces, pool surrounds, and custom cut-to-size work

Published EN Test Reference for Turkish Noce Travertine

A published technical sheet for Noce Travertine from Turkey provides exact-material values under named EN methods. The density is closely supported by separate Turkish Noce suppliers, while water absorption and strength values vary more widely between quarry selections and test sheets. For that reason, the EN-tested Noce dataset below is used as the primary material reference and the cross-check column shows where other exact Noce sources differ.

Kiinteistö Testimenetelmä Published Result Cross-Check Note
Apparent Density EN 1936 2485 kg/m³ Daymar publishes 2489 kg/m³; Arel lists approximately 2474–2580 kg/m³ for Turkish Noche
Avoin huokoisuus EN 1936 4% Exact-material EN result; pore structure and fill treatment can change surface behavior
Water Absorption at Atmospheric Pressure EN 13755 1.2% Other exact Turkish Noce sheets publish approximately 0.87–1.03% in comparable supplier data; wider quarry variation also exists
Taivutuslujuus EN 12372 8.5 ± 3 MPa; lower expected value 4.6 MPa Other Noce sources publish higher modulus-of-rupture values, confirming meaningful block and test-source variation
Puristuslujuus EN 1926 101 ± 23 MPa; lower expected value 61.7 MPa Arel publishes 90.6 MPa; Daymar publishes 66.42 MPa for Turkish Noce, so current-batch testing matters for engineering approval
Abrasion Resistance EN 14157 22.07 mm; upper expected value 23 mm Exact-material EN result for the referenced Noce selection
Pakkasenkestävyys EN 12371 OK Exterior approval still depends on current batch, pore treatment, finish, drainage, fixing, climate, and installation detail
Mohs Hardness Mohs scale 3 Consistent with the normal calcite-rich character of travertine

Reference basis: Brachot NOCE technical sheet for Turkish travertine, cross-checked against exact Noce / Noche data published by Daymar Stone, Arel Stone, and Alimoğlu Madencilik.

Final values can be confirmed by current-batch test report when required for project approval.

Noce Travertine Floor Tile in warm walnut brown for villa hotel and residential flooring

Noce Travertine Floor Tile: Filled vs. Unfilled, Finish, Slip, and Layout

Interior floors are commonly specified honed and filled when a smoother surface and easier routine cleaning are required. Tumbled or brushed-style textures are often selected when a more aged or tactile surface is preferred. Unfilled material keeps more of the natural pore structure visible and requires a different maintenance strategy.

The floor drawing should define tile size, thickness, cut direction, fill treatment, finish, joint width, movement joints, substrate, slip requirement, and installation pattern. On 600 × 1200 mm or 1200 × 1200 mm formats, blending several tiles before fixing helps distribute the darker walnut and lighter cream areas naturally.

For wet or heavily trafficked areas, finish selection should be based on the project’s required slip performance rather than assuming a polished, honed, or tumbled surface is suitable in every condition.

Noce Travertine Wall Tile and Travertine Cladding Tile

Noce Travertine Wall Tile can be used for bathroom walls, hotel corridors, lobby features, fireplace surrounds, villa interiors, façades, garden walls, and other cladding. Cross-cut panels produce a calmer cloud-like structure, while vein-cut panels give the wall a more linear architectural direction.

For exterior cladding, panel size, thickness, fixing method, substrate, anchors, drainage, cavity ventilation, freeze-thaw exposure, finish, filled or unfilled pore treatment, and corner returns should be reviewed as part of the façade design. A sealer is not a substitute for a correct fixing and drainage system.

Bathroom Floors and Walls: Pores, Waterproofing, Grout, and Cleaning

Noce Travertine bathroom tile project with warm brown floor and wall natural stone surfaces

Brown Noce Travertine adds warmth to bathrooms without relying on highly reflective surfaces. Filled-and-honed tile can create a more controlled interior finish, while selected textured or tumbled pieces can introduce stronger natural character.

Travertine itself is not a waterproofing system. Shower walls and wet floors require a suitable waterproof substrate and membrane, correct drain and penetration details, compatible adhesives and grout, and a finish that meets the project’s slip requirement.

Because travertine is calcium-carbonate based, acidic bathroom cleaners, vinegar, citrus products, and aggressive descalers can etch the surface. Maintenance planning should be established before handover, especially where pore filler or grout is exposed.

Stairs, Terraces, Pool Surrounds, and Exterior Use

Noce Travertine is used for stair treads and risers, terraces, patios, garden paths, pool surrounds, coping, and selected façade applications. Exterior use should match the finish and pore treatment to climate, drainage, water exposure, freeze-thaw conditions, traffic, and cleaning requirements.

Where project approval relies on numerical performance, the published EN data above is useful for preliminary review but should not replace current-batch testing. Pool and wet exterior details also need attention to edge geometry, slip resistance, salt or chemical exposure, water drainage, and joint design.

Dry-Lay, Cut Direction, and Installation Planning

Noce’s brown tone and natural pores can vary visibly across a large tile package. Dry-lay review is useful for floors, stair runs, wall panels, and cladding where the designer wants controlled blending rather than random shade changes.

  • Separate cross-cut and vein-cut pieces unless the design intentionally mixes the two structures.
  • Blend darker walnut, medium brown, and lighter cream tiles across the installation area before fixing.
  • Mark vein direction for rectangular wall and floor pieces so linear patterns remain intentional.
  • Confirm filled or unfilled pore treatment, grout color, joint width, and finish before production.
  • Carry room, elevation, stair-flight, or façade-zone labels through inspection, packing, and installation.

Factory Support, Inspection, and Export Packing

Travertine tile projects often contain many repeated pieces, so consistency of size, thickness, finish, fill treatment, shade blending, and packing sequence matters more than selecting one perfect slab.

  • Inspect brown color range, pore density, cut direction, fill quality, surface finish, and visible natural features before packing.
  • Check tile dimensions, thickness, squareness, calibration, edges, stair profiles, and custom cut-to-size details against approved schedules.
  • Photograph representative dry-lay groups where shade or vein continuity is important.
  • Label tiles and custom pieces by room, wall elevation, stair flight, terrace, or façade zone when sequence matters.
  • Use reinforced export crates or pallets with separation and corner protection appropriate to tile size and finish.

Common Specification Mistakes with Noce Travertine Tile

  • Calling all Noce tile “Italian travertine” without confirming the actual source; Turkish Noce is a major commercial reference.
  • Mixing cross-cut and vein-cut tiles without intentionally controlling the pattern direction.
  • Assuming filled and unfilled surfaces will weather, clean, and age in the same way.
  • Choosing polished tile for wet walking areas without reviewing the required slip performance.
  • Treating sealer as waterproofing in showers or exterior cladding.
  • Using one published Noce test sheet as a universal current-batch certificate despite natural block and quarry variation.

Care and Maintenance for Brown Noce Travertine

Use a pH-neutral cleaner intended for travertine or limestone. Avoid vinegar, citrus cleaners, acidic bathroom products, aggressive descalers, and abrasive pads. Acidic products can etch calcite-rich travertine even when the surface is sealed.

Sealing requirements depend on fill treatment, finish, exposure, and application. Filled interior floors, unfilled exterior paving, bathroom walls, and pool details do not have identical maintenance needs. During construction, protect finished tile from grout haze, mortar contamination, metal dust, dragged grit, and impact.

FAQs About Noce Travertine Tile

Mikä on Noce-travertiinilaatta?

Noce Travertinilaatta on lämminruskea luonnon travertiinilaatta, jossa esiintyy pähkinänruskeaa, beigen, kermanväristä, harmaata ja silloin tällöin punertavaa sävyvaihtelua. Sitä voidaan leikata ristiin saadakseen pilvimäisen huokoskuvion tai suoraviivaisemman juovaustuloksen, ja sitä käytetään lattioissa, seinissä, kylpyhuoneissa, portaissa, julkisivuilla ja terasseilla.

Onko Noce Travertine Turkista?

Turkish Noce on yksi tämän ruskean travertiinin tärkeimmistä kaupallisista lähteistä ja toimii tässä sivulla käytetyn EN-teknisessä viitejärjestelmässä pohjana. Koska Noce-nimeä käyttävät myös muut toimittajat, projektiasiakirjojen kannalta tulisi varmistaa nykyinen tuotantolähde.

Mitä laattakokoja on lueteltu nykyisellä Esta Stone -sivulla?

[KWEN_MT_ITEM_1]Nykyisellä sivulla on luettelo 600 × 600 mm, 600 × 1200 mm ja 1200 × 1200 mm -laattaviitteistä, joissa on vaihtoehtoja paksuuksille 15, 18, 20, 25 ja 30 mm.[/KWEN_MT_ITEM_1].

Mitä eroa on täytetyllä ja täyttämättömällä Noce Travertinilla?

Filled travertine has visible pores closed with a compatible filler or grout to create a smoother surface. Unfilled travertine keeps more of the natural void structure visible. The choice affects appearance, cleaning, weathering, maintenance, and the suitability of the finish for interior or exterior use.

Can Noce Travertine Floor Tile be used in bathrooms?

Yes. It can be used on bathroom floors and walls when the finish, slip requirement, waterproof substrate, membrane, grout, pore treatment, sealing, and maintenance system are specified for the wet area.

Can Noce Travertine Wall Tile be used outdoors?

Yes, Noce travertine is used for exterior wall cladding and landscape applications, but final suitability depends on panel size, thickness, fixing system, drainage, pore treatment, finish, climate, freeze-thaw exposure, and current-batch engineering data.

What published test data is available for Turkish Noce Travertine?

A published Turkish Noce technical sheet reports 2485 kg/m³ apparent density and 4% open porosity under EN 1936, 1.2% water absorption under EN 13755, 8.5 ± 3 MPa flexural strength under EN 12372, 101 ± 23 MPa compressive strength under EN 1926, 22.07 mm abrasion resistance under EN 14157, and frost resistance rated OK under EN 12371.

How should Noce Travertine Tile be cleaned?

Use a pH-neutral cleaner intended for travertine or limestone. Avoid acidic cleaners, vinegar, citrus products, strong descalers, and abrasive pads because calcite-rich travertine can etch. Sealing and maintenance frequency should follow the actual finish, pore treatment, traffic, and exposure.

Recommended Travertine Products from Esta Stone

Italy Super White Travertine slab with pale ivory white layered natural movement

Italia Super White Travertiinilaatat

Pale white-to-ivory travertine for wall panels, floors, bathrooms, stairs, fireplace features, tables, and light architectural interiors.

Katso lisää

Silver Travertine stone slabs with grey beige and cream linear natural movement

Hopea travertiini

Silver-grey travertine with beige and cream banding for façades, wall cladding, floors, stairs, terraces, bathrooms, and contemporary interiors.

Katso lisää

Dark Silver Gray Travertine with smoky grey charcoal and cream natural banding

Tumman hopeanharmaat travertiinilevyt

Smoky silver-grey travertine with charcoal and cream movement for villas, hotels, floors, walls, patios, stairs, bathrooms, and darker architectural schemes.

Katso lisää

Iranian Ultra White Travertine with bright ivory white natural layered structure

Iranian Ultra White Travertine

Bright ivory-white travertine for façade cladding, walls, floors, stairs, bathrooms, fireplace surrounds, exterior details, and light-toned stone projects.

View More123

The Best 10 Noce Travertine Tile Supplier-Esta Stone
The Best 10 Noce Travertine Tile Supplier-Esta Stone

Request Noce Travertine Tile Photos, Finish Options, and Project Quotation

Send the information that defines the finished tile package so the brown-tone selection, cut direction, pore treatment, finish, fabrication, and quotation can match the actual floor, wall, bathroom, stair, façade, terrace, or landscape application.

  • Application: floor, wall cladding, bathroom, stair, façade, terrace, pool surround, fireplace, or other architectural use
  • Required tile or cut-to-size quantity, dimensions, and thickness
  • Polished / honed / tumbled finish, filled or unfilled pores, and cross-cut / vein-cut preference
  • Floor layout, wall elevations, vein direction, stair details, joints, waterproofing / drainage, fixing, and slip requirements
  • Need for shade photos, dry-lay review, current-batch testing, inspection photos, piece labels, packing sequence, destination, and project schedule
Request Noce Travertine Tile Quote View Travertine Collection

Saatat myös pitää

Lähetä kysely

Tiedustelu